Announcement

Collapse
No announcement yet.

Smart Pie V5 5 pin connector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Smart Pie V5 5 pin connector

    I just completed my 1st build, a Smart Pie v5. It has been working well.
    While cleaning up some of the wiring, i managed to bend a pin in the 5 pin connector coming out of the internal controller.
    It broke while i was trying to straighten it out.
    It looks like this leads up to the dashboard which is a Golden Motors LCD
    What are my best options at this point?
    Are wiring harnesses for the controller available or can a new connector be wired in?

    #2
    If applicable, solder this in: http://www.allelectronics.com/make-a...w/leads/1.html

    Sorry for your frustration. I clean up my wiring a lot and I am always afraid I will damage something.

    Comment


      #3
      You could go here and chat with Gary Salo, he may have what you need.
      Great selection of Hub Motor Kits. Our sine wave controllers deliver strong, smooth, silent power and are programmable with Bluetooth or Windows.


      Alternatively you could eliminate the connector and just splice the wires coming out of the controller to the harness.
      Or, you could buy another controller for about 80 dollars.

      Comment


        #4
        Thanks for the help. I opted to buy a new controller and use the current one as a backup. I will splice the wires coming out of the controller.

        Comment

        Working...
        X