Announcement

Collapse
No announcement yet.

Ask an ebike technical question get an answer within 30 minutes or so.

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • alosip
    replied
    I think there is something wrong with my rear axel. It makes sounds if it’s tightened properly and no sounds if it’s loose. Pleas watch the video. The video initially plays without the sound unless you click on it again. https://photos.app.goo.gl/6wJmqYS8gfzKj1DF6
    Last edited by alosip; 4 days ago.

    Leave a comment:


  • paxtana
    commented on 's reply
    No, these motors do not have same bolt pattern. We have no 104bcd chainring adapter for bbshd, we do have several 130bcd adapters though. We also have 30t chainrings you would not need an adapter for.

  • TaylorN
    replied
    Originally posted by TaylorN View Post
    Does the following chainring adapter work on the BBSHD or is there another one that is recommended?
    https://lunacycle.com/luna-chainring...-bafang-bbs02/

    Thanks!
    Yeah, I didn't see a chainring adapter in their that would fit a 104bcd 30t chainring.

    Is the bolt pattern on the BBSHD the same as the BBS02?

    Thanks!

    Leave a comment:


  • paxtana
    commented on 's reply
    The bbs02 adapter is for bbs02. For BBS HD parts check out the BBS HD parts section https://lunacycle.com/bbshd-parts/

  • paxtana
    commented on 's reply
    I see.

    Please email support@lunacycle.com attn:Seb so we can have our technician take a look

  • alosip
    commented on 's reply
    Yes I took the derailer off to diagnose the problem but the shifter got stuck before when it was properly attached.

  • TaylorN
    replied
    Does the following chainring adapter work on the BBSHD or is there another one that is recommended?
    https://lunacycle.com/luna-chainring...-bafang-bbs02/

    Thanks!

    Leave a comment:


  • paxtana
    commented on 's reply
    The derailer wasn't even on the bike in the video?

  • alosip
    commented on 's reply
    I feel there is good tension in the cable.

  • paxtana
    commented on 's reply
    Are you saying it is doing this even when there is proper tension on the cable?

  • paxtana
    commented on 's reply
    Glad to hear you got it figured out!

  • paxtana
    commented on 's reply
    Please file a support ticket for this one https://lunacycle.com/support-request/

  • alosip
    replied
    My x-1 rear gear shifter got stuck in one position and doesn’t move at all. I’ve uploaded a video. Please take a look maybe someone will have an idea on what happened and how to fix it.
    https://youtu.be/vtSP0dyZGfE

    Leave a comment:


  • alosip
    replied
    I’ve removed the caliper. But it doesn’t mater now. The noise was coming from the front wheel brakes! I swear when I am riding it sounds like it’s coming from the rear not the front! :) I’ve spend two days trying to fix rear wheel when the problem was actually in the front.
    Thanks everyone for helpful suggestions.

    Leave a comment:


  • trekkeer
    replied
    My 6 month old Luna wolf pup worked great for nearly 1,000 miles. After sitting unplugged from the bike for about a month it now only charges to 53.5 volts and shuts down at 48-49 volts, severely limiting my use. The Luna charger is fine as it charges my other pup to full voltage, so I know it’s not the charger. Gone through several charge/discharge cycles and still the same problem. What can I do to get it to go to full charge?

    Leave a comment:

Working...
X