Announcement

Collapse
No announcement yet.

Diamondback sync'r build w/ BBSHD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Diamondback sync'r build w/ BBSHD

    Looking to build this Diamondback sync' r bike 19" lg frame with a BBSHD 1000 w . 52 volt shark pack . Can u tell me which size BBSHD unit to buy ( bottom bracket pic enclosed) and would this bike make a good build. Like riding single track and fire roads but want to be stealth as possible .

    #2
    If it`s no more than 73mm then the 68-73 size will do.

    See https://www.empoweredcycles.com/blog...d-drive-motors

    Comment


      #3
      Just found out it is a 73 mm with 2.5 mm spacers on each side of crank . I assume you would have to add 5 mm to width to get proper offset for arms as to acheave original width to clear chain stay. Makes a total of 78 mm width. Confused on which size to order . Would I need a 92 mm ?
      Last edited by Ludie; 07-29-2017, 07:24 AM.

      Comment


        #4
        The BBSHD 68mm has 68mms of shaft and then 20mms of thread. This motor should be ok. The next motor is 100mm
        Last edited by Rodney64; 08-01-2017, 02:53 AM.

        Comment

        Working...
        X