Announcement

Collapse
No announcement yet.

New Luna DPC14 Color Display...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Maxid
    commented on 's reply
    yeah I did - got the files. Will see if the update works

  • Tommycat
    commented on 's reply
    Anyone take this guy up?

  • dadaltobocaina
    replied
    [ SOLVED ] Hi guys, I talked with a engineer from APT (the company who build display 850c or DPC14).
    He sent me a program to flash the firmware. If someone needs it, just send a msg that I will forward it.... - (dadaltobocaina@gmail.com)
    The new firmware sent "assist 0" to motor before password screen...
    (You will need a UART cable and a power supply (>15Volts) for it)

    Leave a comment:


  • Freewheelingf
    replied
    The dpc-14 password only restricts access to display. It doesn't restrict the motor from powering up.

    Leave a comment:


  • dadaltobocaina
    replied
    Hi guys, I'm facing a problem. My display (DPC14) still power up the bike even without password...
    Does someone can help me? Any firmware update?
    Motor: BBSHD

    Leave a comment:


  • tom e gun
    commented on 's reply
    All that stuff is way over my head, lol, I just want to ride

  • tom e gun
    replied
    Yeah, I couldn't find anything either, oh well, I use my phone to tell time anyway so I guess it doesn't matter much it would be nice if you had the correct time right there. Thanks man

    Leave a comment:


  • cajk
    commented on 's reply
    I have not found a way to change the time format. Don't see anything in the manual, either. But since the clock is totally useless (unless you want to reset the time BEFORE EACH RIDE), I don't really care about the format.

    http://electricbike.com/manuals/dpc14.pdf

  • tom e gun
    replied
    Dose anyone know if you can change the clock on the dpc14 from 24 hr format to standard am/pm

    Leave a comment:


  • Küstenradler
    replied
    Hello
    Ist there a way to put another control panel on to the display ? I like to have the nice round control panel from c961 display on to my DPC-14 Display .Somone know the wire assignment?

    Leave a comment:


  • Siggi26inch
    replied
    Hi there!

    Is there a chance to change the Logo in the Display? (Some have "LUNA", some "INTELLIGENT" and other "EMP", so it is possible, but how)

    Leave a comment:


  • FatMarty
    replied
    What about a firmware update for the controllers running on 52 volts?
    Or a controller built for 52 volts.
    Even if the displays are not capable of showing the higher voltages some Protection for the battery pack is essential imo.

    Leave a comment:


  • wheelwatcher
    commented on 's reply
    Where are you getting these values, Eric? They seem a bit off from those here: http://www.ebikes.ca/tools/charge-simulator.html. Is one theoretical and another real world?

  • Sebz
    replied
    Very slight difference between the 2 greens...at least on my bike, so easy to mix them under low light.

    Leave a comment:


  • Louis
    replied
    Looks like color distinction is important. One is torquise, the other green...off to look...

    Leave a comment:

Working...
X