Announcement

Collapse
No announcement yet.

Want LCD Display, only have thumb throttle.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Want LCD Display, only have thumb throttle.

    I have an e-bike thumb throttle only, with three power lights. and would like a lcd display on my 48v 1000w hub motor. ON the controller is an extra 4 pin connector yellow, red, black, and white wires. Are there any type of display that will fit? PAS is full blast when engaged. THANKS

    #2
    maybe you could post a picture here

    Comment


      #3
      An extra 4 wire pin connector on my controller. Can a Click image for larger version

Name:	
Views:	0
Size:	260.7 KB
ID:	72128 display be added?
      Last edited by yonkk; 08-22-2018, 04:00 AM.

      Comment


        #4
        LCD displays are not generic. Each has a signal protocol that only works with specific controller brands/models. The label on your controller will give more information. If that is not a commonly known model then you are better off purchasing the controller/display as a matched pair. Otherwise, you will toss $50 or more on an LCD that probably won't work. DId you ask the vendor if he supposr an LCD?


        An LCD gives speedometer/odometer. You can get that with a $10 bike computer. Most show battery level, and some have voltage. It seems you already have a wattmeter hooked up.


        Comment

        Working...
        X