Announcement

Collapse
No announcement yet.

Bionx 48 V 11 amp battery connector compatibility

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • jboe
    started a topic Bionx 48 V 11 amp battery connector compatibility

    Bionx 48 V 11 amp battery connector compatibility

    I'm getting ready to order a Bafang BBSHD mid drive motor kit.
    I have a 48 V 11 amp Bionx battery I want to use with the motor.
    Will I need adapters to connect the motor to my battery?
    I've posted a photo of the battery's connectors used to connect to Bionx's hub motor (my hub moto burned out after 9 years)
    Thanks

    Click image for larger version

Name:	Bionx cable connector.JPG
Views:	1
Size:	172.9 KB
ID:	74482
    ‚Äč
    Attached Files

  • max_volt
    commented on 's reply
    I believe you can measure pack voltage at the charge port as long as the fuse is good.

  • Fred
    replied
    Originally posted by max_volt View Post
    Bionx has a communication bus that connects to console, batt, and motor. You would have to gut the circuitry in the batt and rebuild. I wonder though how much life a 10 year old batt still has.
    I don't have Bionx -- too proprietary, but is it even worthwhile to turn the pack on and check all 2-pin combinations to see if there is a raw 48V there? Or do you know for sure that it wouldn't be if the battery was not connected to a Bionx controller.

    Leave a comment:


  • max_volt
    replied
    Bionx has a communication bus that connects to console, batt, and motor. You would have to gut the circuitry in the batt and rebuild. I wonder though how much life a 10 year old batt still has.

    Leave a comment:

Working...
X