Announcement

Collapse
No announcement yet.

Lcd display motor error help needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lcd display motor error help needed

    Hi all,
    im new to the electric bike Building and Ive started my own rebuild on my mountainbike.
    Everything is connecties ok and all is mounted but when i start the LCD display it shows me an motor icon error (but no further explanation...) Now Ive already measured the motor and everything seems fine ( 3 phases make ac when the motor spins and the voltage to the hallmar sensors are also ok 4.4V)
    Antoine has ant idea how to fix this? Im using 48V 1000W backmotor of champion
    Tomorrow i Will be at the bike itself probably and then i Will place some pictures on here... The controller i use i Found the manual of it online i can place this already on here.
    Thx in advance
    Greetz
    Sbe

    https://m.banggood.com/nl/LCD-+-48V-...r_warehouse=CN

    The motorsets im using
    ​​​​
    Attached Files
Working...
X