Announcement

Collapse
No announcement yet.

BBS02+Kona Splice+a bunch of aftermarket bike parts=super fun trail/commuter bike

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    Posted Photos 9 Photos
    I call this... "Son steals Dads bike". After blowing by my son going up a shale covered hill :-) Old age and treachery overcomes youth and skill !
    Kona Splice become "mMAX".
    Prepping my 52V11.5AH LunaBatt. Found the bag on Amazon. Just happened to be the right size.. Even came with two straps, one of which I used as the batt. retaining strap.
    Sliding the batt. into it's cage & fully installed.
    These are great heatshrink watertight splice connectors. If I did it over again, I would offset the spices more so that if they ever separated, the chance of shorting to each-other would be minimized.
    Cardboard mockup to determine shape and position of magnets/ sensor that would work, then final parts in aluminum. Final version has magnet rotated 90 degrees to be parallel to switch bottom surface. Makes a huge difference in switch function. I believe that this is du to the pattern of magnetic lines of flux.
    I used 3M 5200 Marine adhesive/sealant to bond the front edge of the wire loom to the motor. This flexible adhesive is incredible.. just don't get it where you don't want it ! :-)
    Inexpensive wire management product found at Home Depot. Has mounting tape on back side for adhesion to frame. Can be painted to match as this is.
    160 vs. 203
Previous template Next
Working...
X