Announcement

Collapse
No announcement yet.

Surly Pugsley 2.0 with BBSHD 100mm?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Surly Pugsley 2.0 with BBSHD 100mm?

    Hi all,

    Has anyone had success (or failure) with building the new, redesigned Surly Pugsley 2.0 with a BBSHD 100mm? I see this thread regarding a build with the older Pugsley, but it sounds like the updated version may have more intrusive chainstays, so wondering if the 100mm BBSHD will work. Ultimately thinking of using a Gates Carbon Drive system with Nuvinci N360 hub, if anyone has thoughts/experience on that.
    My daily commute is 13 miles each way, and I found myself making excuses for driving my car instead of biking, especially with snow on the road. I own a Surly

    #2
    Did you ever find your answer? Looking at building a Pugsly with the BSHD motor right now.

    Comment


      #3
      Originally posted by BigFatDummy View Post
      Did you ever find your answer? Looking at building a Pugsly with the BSHD motor right now.
      I didn't find an answer, but I gave it a go anyway. No way to make the Gates belt drive work, but I did get the 100mm BBSHD to work with a Nuvinci n360. It required a lot of spacers, though, and an offset crank on the non-drive side, as I recall, and the chainline ia a mess. If you're running singlespeed, I'd recommend chain tensioners to keep the chain from dropping constantly due to the bad chainline.

      Comment


        #4
        I got the Pugsley, but trying to work out if I should get the 100mm or 120mm motor. I've seen both builds but definitely worried about the chain line and I don't want the chain falling off like I've seen people saying...

        Comment

        Working...
        X