Announcement

Collapse
No announcement yet.

ISCG05 Removal

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    ISCG05 Removal

    I don't know how common these are but my frame had one and needed to be removed to fit the BBSHD.
    These are a mount for a sprocket guard. This one was tack welded to the outside diameter of the bottom bracket. My bottom bracket was 73 mm before I took it off and is still 73 mm.
    This was easy to remove with a cut-off wheel. I ground down the weld most of they way then tapped it off with a hammer. May take a couple times of little by little so you don't damage the BB.
    ISCG05 needs to be removed to fit mid drive. Grind only the weld. I put the tool up against the part I was removing to keep it steady.

    #2
    Nice,

    "Make way!"

    Comment


      #3
      awesome thanks for that.

      Comment

      Working...
      X