Announcement

Collapse
No announcement yet.

Gear Sensor 'Y' Adapter for throttle testing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AZguy
    replied
    I would be very interested in yours and anyone elses' measurements

    Leave a comment:


  • JPLabs
    replied
    Hey, that's a great idea! Thanks. Ordering one now.

    EDIT. Done.

    FYI: https://lunacycle.com/bbsxx-three-pin-higo-y-splitter/
    Last edited by JPLabs; 12-22-2018, 01:19 PM.

    Leave a comment:


  • svenpup
    started a topic Gear Sensor 'Y' Adapter for throttle testing

    Gear Sensor 'Y' Adapter for throttle testing

    I wanted to check my throttle output voltage to make sure my start and end voltages were optimized. I was trying to come up with a setup to provide the throttle with correct power when I remember that the throttle connectors are the same as the brake sensor and gear sensor connectors (but reversed). I was able to insert the 'Y' between the controller and the throttle and read the voltages with a DMM on the extra connector. Easy Peasy.
Working...
X