I put the Luna aftermarket foot pegs on my Sting R right out of the box and it bothered me that the foot pegs did not stick out straight. They both angled in/forward, especially the left peg.
So I cut some little chunks of sheet metal to shim where the foot peg presses against the foot peg bracket (see pics). Worked great!
I used a little hook tool to pull the spring leg up out of the way as I slid the metal shim up into place.
For the left peg I had to cut a longer strip and fold the bottom of the metal strip back over itself to double up the width.

Click image for larger version

Name:	Footpeg shim Before & After.jpg
Views:	125
Size:	1.36 MB
ID:	166115 Click image for larger version

Name:	Footpeg shim.jpg
Views:	71
Size:	1.33 MB
ID:	166116