Announcement

Collapse
No announcement yet.

25A Controller NOT compatible with Thin

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Sondors Thin with 25amp Controller:
    Pics of simple re-routing of cables. A little electric tape and voila...

    No extensions or other cables needed.

    Wire nuts are temporary until I can pick up some butt splice crimp connectors..
    Last edited by FolsomRider; 09-06-2016, 02:21 PM.
    http://electricbike.com/forum/forum/...-disc-fsr-2005

    Comment


      #17
      Folsomrider: does the battery fit anymore so that it clicks to it place now that there is wibres behind it?

      Do you have the 3party computer, does it work also?
      Last edited by haare; 09-06-2016, 08:15 PM.

      Comment


      • FolsomRider
        FolsomRider commented
        Editing a comment
        Yes it fits perfectly. The round black rubber pads in the pics are to enough leave space for the battery. It clicks in place like it would otherwise.

        You will need to get the matching LCD to program the controller but it is $100 for both as a package from Luna. Works great! 20 Minute install.
        Last edited by FolsomRider; 09-06-2016, 08:53 PM.

      • FolsomRider
        FolsomRider commented
        Editing a comment
        this screen and controller option should work. http://lunacycle.com/batteries/gauge...ammed-kt-lcd3/
        you will need to cut the battery connector off the original controller (Sondors uses a unique aircraft 4 pin connector to the battery) and splice it on the Luna controller but it is simple. You can use butt splice crimps, Solder, or even wire nuts if you want. PM me if you need help.
        Last edited by FolsomRider; 09-06-2016, 08:57 PM.

      #18
      FolsomRider What's the downside to using wire nuts and electrical tape? I noticed you said you "Wire nuts are temporary until I can pick up some butt splice crimp connectors..". Just curious why you wouldn't just stick with the wire nuts?

      Comment


      • paxtana
        paxtana commented
        Editing a comment
        Wire nuts are not a reliable strong connection suitable for long term use in high power transportation.

      #19
      FolsomRider Have you had any issues with the battery or motor since splicing the 4-pin battery connector to the new controller? I know lunacycle advises that people use an XT-90S connector (https://lunacycle.com/batteries/conn...with-pigtails/))

      Comment

      Working...
      X