Announcement

Collapse
No announcement yet.

13 and 14 gauge spokes and nipples.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    13 and 14 gauge spokes and nipples.

    I won't be using these. Shiny objects bother me.

    14 gauge silver, 262mm length. I have 64 of these straight gauge steel spokes with 64 nipples. From Bath Cycle & Ski, so almost certainly Sapim. In any case, not junk. These were used to build this 32h Salsa hub http://salsacycles.com/components/ca...ub_front_150mm into a Surly Clownshoe rim. This wheel build was a 2 cross pattern. When I received the wheel, I immediately took it apart and built a wheel with black spokes and nipples.

    13 gauge silver, 165mm length. I have 80+ of these straight gauge steel spokes with 80+++ nipples. From Empowered Cycles, so probably Sapim. Definitely not junk. These were used to build a 36h Cromotor into a Surly Rolling Darryl rim. This wheel build was a 2 cross pattern. When I received the wheel, I immediately took it apart and built a wheel with black spokes and nipples.

    None of these spokes have ever been on a ride. They were used to build wheels, but I need all black parts.

    I think that all of the nipples are brass.

    Make offer. They will be a deal because I won't ever use them. Buyer should understand that spokes are bent a little (or maybe not at all) in a wheel build. When you build the new wheel, the spoke tension will rectify that.
    Last edited by commuter ebikes; 06-23-2017, 11:07 AM.
Working...
X