Announcement

Collapse
No announcement yet.

QS 205 50H V3 in 16” moped rim?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    QS 205 50H V3 in 16” moped rim?

    I can’t find any info about fitting this hub motor into a 16” moped rim. Is the reason I can’t find any info because it’s not possible? I already have the wheel, but I’m awaiting the motor. I know that it will work in a 17” moped rim, but I’d rather stick with the 16” setup if at all possible. Any help is appreciated. Thanks!

    #2
    Answering my own question if anyone else ever asks...

    It will work. I got the motor and measured it all up. Ordered 91mm spokes and I’ll be lacing up when they arrive.

    Comment


      #3
      Originally posted by ttam View Post
      Answering my own question if anyone else ever asks...

      It will work. I got the motor and measured it all up. Ordered 91mm spokes and I’ll be lacing up when they arrive.
      I like to use Wheelsmith Spoke Prep for the spoke threads when I do that.

      I also like to put some oil in the rims where the nipple seats.

      I’m sure you will be doing a one cross pattern.

      Comment

      Working...
      X