Announcement

Collapse
No announcement yet.

C965 Display (!) message

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rob Anker
    replied
    Brake Sensor had moved! I should have sussed it myself... Thank you so much both of you!

    Leave a comment:


  • max_volt
    replied
    Don't forget the shift sensor.

    Leave a comment:


  • theronchaplin
    replied
    If you disconnect the brake sensor, does the ((!)) go away? I've only known that symbol to mean brakes are engaged, which then, of course, shuts down the motor. I know you said you disconnected and reconnected cables, but did you try it disconnected?

    Leave a comment:


  • Rob Anker
    started a topic C965 Display (!) message

    C965 Display (!) message

    Hi all'
    Need some help. The display on my Bafang 750w is showing the ! sign and suddenly refuses ro turn the motor. Although I have checked the brake is not engaged and disconnected/reconnected all the cables.
    At the time I was going over some very rough tracks. Can anyone the cause and what I might have can do to rectify? Thanks in advance.
Working...
X