Im ordering a BBSHD for my cannondale mtn bike with a 68mm threaded BB. But i looked everywhere and cannot find the measurement on the BBSHD to where it will hit your chainstay. Can someone with a 68 BBSHD measure this for me so i can measure my frame to see if it will hit? thanks.... in other words how far out does the alum BBSHD casting extend away from the center of the bottom bracket?
-
-
I get about 68mm. If you need more room - since the chainstay is angled you can sometimes clear it with spacers between the bb and bbshd casing.Do something that is good for your health, good for your wallet and good for the planet - get an e-bike.
www.poweredride.com -
thanks for the info. I just measured it and it looks like it might just hit the chainstay. i believe the 68mm BBSHD is made to fit a 73mm also so it should have extra threads on the non drive side so i think i can use a spacer on drive side to move BBSHD out away from chainstay.Comment
Comment