Anyone know how to replace Cyclone 3000w hall sensore

[Redtank]

Hello,
Anyone had to replace Hall sensors yet? If so, is it difficult and what p/n numbers/brand used?

Thanks,
Cris

[spinningmagnets]

It's very technically easy, but time-consuming. Replace all three with authentic Honeywell halls. They can take more heat than generic Chinese hall sensors...

Honeywell SS41 or SS411A are commonly used ebike halls - both are rated to 150-degC and either are suitable replacements in motors.

Check this guy in the bay area to see if he has them in stock

https://endless-sphere.com/forums/vi...p?f=31&t=20410

https://www.youtube.com/watch?v=vrUjPNIs348

https://endless-sphere.com/forums/viewtopic.php?f=10&t=72074

[Redtank]

spinningmagnets,
Thanks for the reply! Can't check my hall sensors because I believe I've damaged my batteries BMS (posted on another thread), tried doing a reset with charger, but that only lasted 1 minute or and and back to no power.....

Cris

[Robocam]

Paco sent me 2 sets for free. You should contact him over at Cyclone.tw

This is how I changed mine.

https://endless-sphere.com/forums/viewtopic.php?f=28&t=69867&start=1400#p1224666

Hello,
Anyone had to replace Hall sensors yet? If so, is it difficult and what p/n numbers/brand used?

Thanks,
Cris