Announcement

Collapse
No announcement yet.

Anyone know how to replace Cyclone 3000w hall sensore

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Anyone know how to replace Cyclone 3000w hall sensore

    Hello,
    Anyone had to replace Hall sensors yet? If so, is it difficult and what p/n numbers/brand used?

    Thanks,
    Cris
    Tags: None
    #2
    It's very technically easy, but time-consuming. Replace all three with authentic Honeywell halls. They can take more heat than generic Chinese hall sensors...

    Honeywell SS41 or SS411A are commonly used ebike halls - both are rated to 150-degC and either are suitable replacements in motors.

    Check this guy in the bay area to see if he has them in stock

    https://endless-sphere.com/forums/vi...p?f=31&t=20410

    Hub Motor Repair - Opening Testing Hall sensor replacement etc.
    https://www.youtube.com/watch?v=vrUjPNIs348
    How to repair a brushless direct drive hub motor.


    Replacing Hall Sensors
    https://endless-sphere.com/forums/viewtopic.php?f=10&t=72074
    Hello, I have just bought used electric scooter with damaged hub motor. It was totally blocked with rust between magnets and rotor. After pushing rotor out and cleaning everything motor started to work - but it doesn't work as it should. I found, that one hall sensor is dead. There is spare set...

    Last edited by spinningmagnets; 07-20-2016, 11:37 AM.

    Comment

      #3
      spinningmagnets,
      Thanks for the reply! Can't check my hall sensors because I believe I've damaged my batteries BMS (posted on another thread), tried doing a reset with charger, but that only lasted 1 minute or and and back to no power.....

      Cris

      Comment

        #4
        Paco sent me 2 sets for free. You should contact him over at Cyclone.tw

        This is how I changed mine.

        new cyclone 3000 w mid-drive kit?
        https://endless-sphere.com/forums/viewtopic.php?f=28&t=69867&start=1400#p1224666
        hi.. has anyone heard tried this kit before? http://cyclone-tw.com/order-3chain.htm i'm referring to the first kit xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx [moderator edit to insert video limk] https://www.youtube.com/watch?v=RFfw4aeajHk RFfw4aeajHk


        Originally posted by Redtank View Post
        Hello,
        Anyone had to replace Hall sensors yet? If so, is it difficult and what p/n numbers/brand used?

        Thanks,
        Cris

        Comment

        Previous template Next
        Working...
        X