"Edge" 1500W DD hub with 35mm wide stator, thin laminations, aluminum core

[calfee20]

That is what I ordered. Edge on a 26" wheel.

[Green Werks]

C-20 I emailed him the other day
His web site shows that he has A edge in stock laced on a 26
but when I asked about the availability of the edge and a 18 fet controller
he said that he would have to get the motor
let me know how you make out.

[calfee20]

Battery is great no sign of the edge. I should email them.

[Green Werks]

SM how is the battery
C-20 how is the edge and the battery

[spinningmagnets]

I'd recommend getting a pack that is a little larger than 10-Ah. It will help longevity by putting less stress on each cell, plus every new rider appreciates more range after they begin riding. I know budgets can be a sensitive subject, but...no matter what vendor, a bigger pack is a huge benefit.

new 24-Ah pack arrived, hope to charge up and test this weekend.

edit: grand kids visiting, no time for projects right now, maybe next week?

[Green Werks]

C-20 Her and her husband said that they wanted something Reliable that would go at least 25 miles distance
speed not important so I figured the edge set up that I have but with the 48v 10ah GA would get it done
and they have approved a $1200 budget

[calfee20]

ERT is out of stock of most everything. Oh and what are you trying to do, kill that old lady. Put an edge on a 20" wheel and that trike will be a drag racer.

[Green Werks]

C-20 whats up dude are you living on the Edge yet whats up with the battery
Spinning Magnets did you get the Big battery yet and if so has it changed your life
I've just been commissioned to build a ICE trike for a 70 year old lady who is handicapped
I am trying to get Alan to lace a 20 inch wheel on the Edge for the motor
We are going to use the Luna 48v GA cube for the battery
and the 3000w ERT controller should be a great trike
Cheers Dudes Bill.

[Dale H]

Over on the Fast Electric Bike Facebook page there is a guy named Mike QS motor Moser who uses Sunwin brand controllers in his builds. He is also on here as Ebike1, I'd give him a shout to find out where he gets them. Hope this helps, ride on safe guys

[calfee20]

I just ordered an edge from ERT. It already has a 26" wheel laced to it. So the plan now is to swap the BBSHD to the fat bike. It is going to rain for the next 4 days so I shouldn't lose any riding time. Then I will install the edge on my regular cruiser.

I just read spinnngmagnet's article on controllers, batteries, and FETs. http://www.electricbike.com/52v-battery-3077-fet/ The 3077 FETs run cooler but should be limited to 63 volts or they are great for our 52 volt batteries.

I need a controller now with 3077 FETs that will run 50 or 60 amps and a few places are out of stock because this is the season. Does anyone know about this guy or this controller. He sells on eBay out of Washington State. http://www.ebay.com/itm/272627479577...577&rmvSB=true Grin has a 40 amp controller and a 50amp phaserunner that is $300. Any opinions on those..............calfee

[Green Werks]

My motor has these numbers stamped in the side of it
NCPS16101329 what kind of info can be had from this

[Green Werks]

This is the controller that I am thinking about trying if my 12 fett wont stay cool mounted outside the bag
https://electricrt.myshopify.com/col...ller-18-mosfet
or maybe this one https://electricrt.myshopify.com/col...60a-controller

[calfee20]

Years ago we used to get walkie talkies performing better by inserting better specked transistors. When I look at a FET I see a specialized transistor or diode. They aren't integrated circuits.

So do you know of a good sine wave controller that doesn't have 3077 fets?

[spinningmagnets]

You read my mind! (Plugs-in 100W soldering iron with a fat tip, and laughs maniacally while rubbing hands together)

[calfee20]

Could you solder 3077's to that cyclone controller?