Announcement

Collapse
No announcement yet.

"Edge" 1500W DD hub with 35mm wide stator, thin laminations, aluminum core

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Green Werks
    replied
    Thankx Dude I will look into it

    Leave a comment:


  • moarpower
    replied
    Hi Bill, I did a good deal of searching on alibaba and google. I came up with a few leads. Afterwards I was contacted by a company about a motor you might be looking for. (Not 100% sure it's legit yet.)

    I'll send you the info in a private message.

    Leave a comment:


  • Green Werks
    replied
    C20 where did that motor come from
    I am on the hunt for info

    Leave a comment:


  • calfee20
    replied
    Wow it took me a while to find this page again.http://mrbill.homeip.net/hybridBike.php Here is the recumbent he drives.

    Click image for larger version

Name:	20070324-powerGoldRushBuild02.jpg
Views:	146
Size:	1,006.4 KB
ID:	37301

    Leave a comment:


  • Green Werks
    replied
    C20 whoo day dude Do U have the Edge

    Leave a comment:


  • Green Werks
    replied
    Figured it out The shunt value was off in the CA was told that it should of been the same as the old 12 fet controller
    1.6 ohm but it is not, I got it sorted out now back to the test runs to get some new numbers this controller
    does not even get warm we shall see.

    Leave a comment:


  • Green Werks
    replied
    Click image for larger version  Name:	 Views:	1 Size:	296.8 KB ID:	37117
    Click image for larger version  Name:	 Views:	1 Size:	282.9 KB ID:	37118

    Update: Surprise surprise surprise
    Went out for a little test run
    I was able to hit 43 mph and using only 34.94 amps
    with the old controller 12 fett I could hit 38.1 mph but I used 50 amps
    If you look at the old posts you can see on the CA
    I thought that this new controller felt stronger and maybe that was just wishful thinking
    but the numbers show that it is WTF this one has me any thoughts Spinning Magnets
    Last edited by Green Werks; 06-06-2017, 08:17 AM.

    Leave a comment:


  • Green Werks
    replied
    Click image for larger version  Name:	 Views:	2 Size:	402.1 KB ID:	37110
    Click image for larger version  Name:	 Views:	1 Size:	590.0 KB ID:	37072

    12 fet controller
    18 Fet sinewave controller Beast
    Last edited by Green Werks; 06-06-2017, 07:17 AM.

    Leave a comment:


  • Green Werks
    replied
    Got the new 18 fet controller plug and play
    This controller is powerful there is a difference from the 12 fet
    cant wait to ring it out

    Leave a comment:


  • Green Werks
    replied
    C-20 good Deal on the edge
    tracking says that my controller will be here Monday
    I checked out the controller you want looks nice let us know how it plays out
    Cheers Bill

    Leave a comment:


  • calfee20
    replied
    I just got an email confirming my edge shipment. I'm glad I decided to wait until Monday before complaining. I hate to be a PITA even when I have cause.

    I am pretty sure I will go with this controller. http://em3ev.com/shop/12-fet-irfb307...on-controller/

    Leave a comment:


  • Green Werks
    replied
    Gust ordered a ERT 8000 W 18 fet sine wave controller For the Edge going to replace the 12 fet
    and see if I can turn the heat from the 12 fet into energy with the 18 fet
    The hunt for distance goes on so far 54 miles with battery to spair no peddling
    Cheers Bill GW https://electricrt.myshopify.com/col...ller-18-mosfet

    Leave a comment:


  • Green Werks
    replied
    C-20 I am sure he is a one man band but he has some great tunes
    I emailed him yesterday to order a 18 fet controller he said he had them
    but the web site says they are out of stock we will see
    I look forward to trying out the new 18 fett and see if it improves my efficiency

    Leave a comment:


  • calfee20
    commented on 's reply
    I got a reply to my email. He said he was out of the country and he promised to ship yesterday. It sounds like a one man band.

  • Green Werks
    replied
    C-20 any word on the Edge

    Leave a comment:

Working...
X