Announcement

Collapse
No announcement yet.

Luna X-1 Enduro FS ebike MANUAL

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    jjdicecco
    Newbie

  • jjdicecco
    commented on 's reply
    The rear fender is the same I just had to modify it a little by cutting it to fit.
  • jjdicecco
    Newbie

  • jjdicecco
    commented on 's reply
    The fenders are mucky nutz.. here is the link...
    https://www.evo.com/front-fenders/mu...AaAhV-EALw_wcB


    I did replace the stem for reach and look purposes... I wanted to add a little color but not much... next will be carbon rims

  • alosip
    replied
    My new X-1 makes a “clank” sound once every revolution of the rear wheel but only with the rider on. It happens during coasting downhill or pedaling uphill all the same. It was happening intermittently since I got it a couple of weeks ago but now it’s constant. On top of that every couple minutes it sounds like there is a light metal part is loose. I thought it was my disc brakes but now I took my rear brakes off completely to diagnose the problem and it still happening. Please advise.

    Edited: Problem solves! It was actually brake pads on the front wheel. :) I could swear I heard it coming from the rear wheel.
    Last edited by alosip; 09-22-2020, 04:57 PM.

    Leave a comment:

  • Desmodromic
    Newbie

  • Desmodromic
    commented on 's reply
    Man, that's a pretty bike. Medium frame, I assume? Love the copper colored parts on it. Did you change the stem because you wanted to adjust the reach? It's a beauty! As
    paxtana
    Administrator
    paxtana asked, please tell us more about the fenders!
  • Desmodromic
    Newbie

  • Desmodromic
    commented on 's reply
    Which connector is the correct one for the X-1?
Working...
X