Announcement

Collapse
No announcement yet.

Fuse location on latest Luna Advanced charger

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Fuse location on latest Luna Advanced charger

    There are four screws to access this. Two on left and two on right. Only these top screws need removed to remove the top cover, the others on both sides can be left in place.

    The fuse used is a F6AL250V

    Click image for larger version

Name:	2018-11-19 00_15_33.png
Views:	1
Size:	1.68 MB
ID:	78553

    #2
    Originally posted by paxtana View Post
    There are four screws to access this. Two on left and two on right. Only these top screws need removed to remove the top cover, the others on both sides can be left in place.

    The fuse used is a F6AL250V

    Click image for larger version

Name:	2018-11-19 00_15_33.png
Views:	1
Size:	1.68 MB
ID:	78553
    Good morning,
    My advanced 52v charger recently stopped working. I plug it in and no response. LED light is dead as well as display screen. Unit does still slowly get warm. I open the case and looked for a fuse in the location described but there is no fuse there. I inspected everywhere else on the charger and cannot find a glass tube fuse anywhere. Do you have any suggestions? The charger is only about a month old. Order #66451

    best, Stephen

    Comment


    • paxtana
      paxtana commented
      Editing a comment
      Did you check that it's not the other version with the screw-in fuse on the outside of the case

    #3
    I can't find a glass tube fuse anywhere.

    Comment


    • paxtana
      paxtana commented
      Editing a comment
      Please email support@lunacycle.com and ask for this to be forwarded to Gary. Apparently the newest model may have some sort of resettable fuse in a different location, in any case since this is basically new we can just replace it if you send us an email.

    #4
    Thank you, will do as you advise.

    best
    stephen

    Comment

    Working...
    X