Hi guys, long time. V2 works great and outlived my phone. Where is the link for Luna's VESC app for my new phone? thanks
-
-
I believe for some reason it got taken down / removed from luna's site but going back with the waybackmachine I found the link which seems to still back active, I've put it in the waybackmachine as well just incase it gets taken down: https://lunacycle.com/content/Update...l-v3.01.22.apk
-
-
Hey xcnick, great to see you back. I acquired a V2 controller a couple months back and built an new bike around it. Amazing piece of equipment. Here's the user manual for the V2. The Luna Vesc for android link is on page 4. https://drive.google.com/file/d/1sFW...ew?usp=sharing. Here's a pic of the bike. Hope to do a full write up soon. Take care.Comment
-
I get the manual. The link to luna update is just the generic version of VESC. A page down they say don't use it, use the Luna version, but the link is not active. Are you using the generic version? The thing I want the most is tempuratures. I didn't think I would need it the last couple of weeks and guess what? I smoked a motor.
Nice ride zmarkjam. A decent enduro is my go to bike. Add a basket it becomes stealth until you hit 45mph.
Attached FilesComment
-
-
Ok, stupid question, but looks to be a lot of smart people on this thread. I have one of the old Version A (Anderson) BBSHD “Hot Rod” programmed regular controllers from Luna w/ a 52v Panasonic GA 14s5P 17.5Ah battery. Would like to upgrade (mostly acceleration/torque, perhaps a bit of top end speed), but seems options may be limited due to compatibility/availability. I think the battery would put out 40 amps continuous but cannot remember if it was limited by Luna with the BMS at 30amps, so am I stuck at 30amps regardless? If not, any way to work a Ludicrous V1 onto an old style Type A to run at 40amps? Other options? Would just go straight for a V2 and Luna Wolf w/ 50amp BMS if that were possible/available. Much appreciated!Comment
Comment