Announcement

Collapse
No announcement yet.

Kelly KBS Series Controllers

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    I know this is an old thread and its 2020 already but just like stuffc, i joined this forum hopefully to get a pic to make better sense of:

    'I run a 20awg siliconized wire from the thick B+ cable to the PWR space (top left) and I run a B+ loop to the on/off switch which connects #7 pin. '

    im guessing the above means from the PWR space there is another wire that loops to the #7 pin with an on/off switch in between. is this correct?

    Also,

    Same with mountainwheelchair's comment, i want to avoid adding contactor and resistors, like alot of the ppl does. is this advisable ?

    Comment

    Working...
    X