Common Mount Hardware Specs for Luna Small Parts

[paxtana]

Incomplete; to be updated later

1. 860C - Selector Switch bolt type: m3 bolt
2. 860C - Screw type for back of display:
3. 500C - Bolt type: m4 x 8mm Allen head regular thread standard pitch. Bolts directly into a threaded metal housing.
4. DPC 18 - Selector Switch Bolt type: M3x10. Nut not necessary. Screws into buttons selector switch.
5. DPC - 18 Mount type for back of display: M3 x10 . Nut not necessary. Screws into the display mounts.
6. DPC 14 - Selector Switch Bolt Type: m3 x 10mm. Screws into a m3 nut. Nut is necessary to screw in.
7. DPC - 14 Mount type for back of display: m4, unknown length. Possibly m4 x 10mm. Screws into a nut. Nut is necessary to screw in.
8. DPC240 - Mount type:m3x15 for the display part
9. DPC240- remote m4 x10mm
10. Crank bolt type for X1 bike and BABE: m15. like this. or this.
11. Eggrider bolt type: Allen head m3 x 8mm machine bolt. Bolts directly into a threaded metal housing. Fine thread, standard pitch.
12. DPC 07 - bolt type
13. 750C - bolt type for back of display
14. standard thumb throttle : m4 x 16mm machine bolt. Bolts directly into a threaded metal housing. Fine thread, standard pitch.
15. Left thumb throttle
16. Surron controller, terminal bolts for phase wires: socket head M6*16
17. Eclipse bolts for mounting sprocket to face: Allen head M4 x 10mm
18. Bolts for mounting chainring to bbshd motor itself: M5
19. M600 crank bolt: ISIS M15
20. Surron jackshaft bolts - m6 x 16mm, 1mm pitch
21. Surron CR80 adapter bolts - m8x1.25 16mm long
22. Wheel spacers - Apollos are same as matte X1 (proprietary, contact luna)
23. Wheel spacers - Galaxy colored X1 use different spacers (proprietary, contact luna)

Notes for editing:
Keep formatting throughout.
Needs specified if this is just a bolt, a screw, or a bolt plus nut
Needs specified diameter plus length not including the head, i.e. M3 x 10mm