BIKE\FORK Luna Lander Fat / Mosso / Sondor fork


Luna Lander Thin Rock Shox Bluto /
Luna Lander Carbon
LAUF CARBONARA / WREN INVERTED / RST RENEGADE
DNM USD-8S /
ROCK SHOX RC 200MM
Mini Mosso Folder
Giant momentum
SMOOTHIE Cruisers
Luna CycloCross Ebikes
KHS 500 PRE-2018
KHS 1000 PRE-2018
KHS 3000 PRE-2018
KHS 500 2018
KHS 1000 -2018
KHS 3000 2018
LUNA APEX
LUNA APOLLO
LUNA LUDICROUS FS
SONDORS FAT
SONDORS THIN
Bolts-on, no modifications required
Will require changing the front hub to a 135mm wide w 9mm QR
Will require a new head set converter and some 15mm to 9mm axle adapters (may also require to change the hub to 150mm 15mm thru axle)
Will require a new lower head set converter and crown race (see below)



FORK MODEL Headset / Steerer Dropout Width Axle type Axle to crown lenght
Tire Diameter Tire Width
Mosso /Sondor basic fork 1 1/8" straight threadless 135mm 9mm QR 520mm 26 inch Fat 4.8" depending on brand
Luna Lander Fat 1 1/8" straight threadless 135mm 9mm QR 520mm 26 inch Fat 4.8" depending on brand
Rock Shox Bluto Tapered 1 1/8 to /1.5" 150mm 15mm thru-Axle 531mm
26 inch Fat 4.8-5.0" depending on brand
Luna Carbon Fat Tapered 1 1/8 to /1.5" 150mm 15mm thru-Axle 540mm 26 inch Fat 4.8" depending on brand
Wren Inverted Fat Tapered 1 1/8 to /1.5" 150mm 15mm thru-Axle NA
26 inch Fat 4.8-5.0" depending on brand
Lauf Carbonara Fat Tapered 1 1/8 to /1.5" 150mm 15mm thru-Axle NA 26 inch Fat 4.8" depending on brand
RST Renegade Fat Tapered 1 1/8 to /1.5" 150mm 15mm thru-Axle NA 26 inch Fat 4.8" depending on brand
Rock Shock RC 200 1 1/8" straight threadless 110mm 20mm thru-Axle NA 26 inch Depends on diameter and brand 2.5"
DNM USD-8S 1 1/8" straight threadless 110mm 20mm thru-Axle 540mm 26 inch Depends on diameter and brand 2.5-3"
Luna Lander Thin Tapered 1 1/8 to /1.5" 100mm 15mm thru-Axle NA
700C Depends on diameter from 1-2.25"



KHS 2018 500 : Not compatible with the Luna lander or the other forks. The steerer tube is a straight 1 1/8" but you can swap the lower 1 1/8"internal headset and crown race with a external tapered 1,5" converter to be able to mount a tapered fork like the RS Bluto, Wren, RST or Lauf on your KHS 500. To convert your KHS500 : The headset can be the NukeProof EX44-40-B5 and the Nukeproof CR-B-2015 onward 1.5" CRown race (Chainreaction cyles) Or the Cane Creek 110 EC44 Lower Conversion and Cane Creek 110 1.5" Alloy Crown Race (from Jenson USA.. but a lot more $$)