Announcement
Collapse
No announcement yet.
Adding a voltage meter to your Sur-Ron
Collapse
X
-
I may be late for the offer, but if sill stands I’d be very grateful order # 146063
-
What are the white connectors called is use for the ignition switch and use for the plug on the headlight
Leave a comment:
-
I would like to request one for my XX as well. Really don't want to be stranded due to incorrect battery % reading. (Order #146107).
Leave a comment:
-
Hi.
I purchased two XX (order # 145874). I would be more comfortable installing this voltmeter on both bikes. Please contact me using my email address if your offer to supply is still available. Thanks!
Leave a comment:
-
Hey guys we only have like one of these left so it is worth bearing in mind about the XX bikes that the gauge will work properly after a few charge cycles. This replacement is really meant more for folks that have an actual defect. That said, if you bought XX we would be happy to send you one when we get more as a courtesy, but it may be weeks before it can be shipped.
If you are leaving a comment here about XX gauge, what you want to do is take it from 100% charge down to like 10-15%, then charge it back to 100%, do this a few times, after that should work fine. This needs done anytime you unplug the BMS, it basically learns what is the percentage.Last edited by paxtana; 12-15-2020, 06:35 PM.
- Likes 2
Leave a comment:
-
I’d also like to hop on this train for my XX. Could I request one too? Order number #146470 Thanks
Leave a comment:
-
Sure but just a heads up I need to get some more sugru to make enough to fill these requests. Might take a few days.
- Likes 1
Leave a comment:
Leave a comment: