Announcement

Collapse
No announcement yet.

Controller

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Controller

    Trying to get my Schwinn Meridian up and running again. I had a Dillinger kit on it that worked great until the electronics got fried. I bought a Chinese kit without the motor and battery so everything would match up but I'm not having much luck getting the wheels rolling so to speak. I'm getting an error message, the same message on three separate motors. Unfortunately, the Chinese kit that I purchased, although apparently of rather good quality, has no other directions (how shocking!) other than a quite well done and complete guide to the LCD functions. I'm wondering what my next step should be as all three motors have all worked in the past and I get the same error code when I hook each one up. Any suggestions from the experts here would be appreciated. Thanks!

    Kevin

    #2
    Hi Kevinst,
    And welcome to the forum! :-)

    A good place to start would be what KT display model you have? What is the error code, and what your "complete guide" description says about it?

    Details of the motors involved may come in handy...



    Regards,
    T.C.
    See my completed Magic Pie V5 rear hub motor E-Bike build HERE.

    Comment

    Working...
    X