Luna batteries and EL wire

[ChumpWG]

looking to power some EL wire to light up my bike for nighttime commute,
obviously would like to wire it in directly to the battery (52V 13.5ah shark),
just not sure about the wiring and dont want to mess up the BMS, bit of a noob when it comes to the DIY elec projects

here is the link for he wire and inverter
EL wire - https://www.adafruit.com/product/408
inverter - https://www.adafruit.com/product/448


would love to hear thoughts from more experienced tinkerers

[max_volt]

If it runs off of 3 AA, maybe can use 5V from usb.

[paxtana]

A 52v nominal battery will blow that inverter. Maybe a buck converter would do the trick?

https://www.amazon.com/DROK-Adjustable-Regulator-Stabilizer-Transformer/dp/B0744BT79M/?th=1

[twido]

Sorry to hack your post, but I have a urgent question, how much space do I need to take the battery of . I want to buy the same battery but don't have much space and if You push the battery up to take it out , I would like to know how much cm I need before I can take it out of the frame. Thanks in advanced . Dirk

[paxtana]

Shark packs require 1" of clearance. Please see the installation section for hardcase packs.

https://electricbike.com/forum/forum/knowledge-base/batteries-aa/12542-luna-hardcase-battery-documentation

[max_volt]

https://www.banggood.com/2M-Single-Color-5V-USB-Flexible-Neon-EL-Wire-Light-Dance-Party-Decor-Light-p-994917.html?rmmds=detail-left-hotproducts