RRP ProGuard Front Bolt on Mudguard and Rear Zip Tie Installed on Lyrik Fork

[IOUZIP]

So I wanted to try and get the RRP ProGuard Bolt-on to fit the Lyrik fork. He is how I did it.

Purchased RRP ProGuard Standard MudGuard
Purchased ProGuard Sleeve Pack for SR Suntour fork

I installed it by drilling a hole in the middle of the fork. Same location where the SR Suntour has a hole.

Purchased a 4mmx20mm screw from hardware store.
Cut down a plastic trim removal tool to the shape needed as a spacer. Drilled 1 hole in it for the 4mm screw.

Solid Mudguard and will trail test it this weekend.

Pictures below.

[IOUZIP]

Just did a 20 mile single track XC ride and the Mudguard is still tight. I did get a tree branch caught under the mudguard once and some rain while riding so I got sand caked to the battery but did not have any sand hit my face. After all my research it seemed like a simple mod and if I had a 3D printer I would have made my own custom spacer.

[IOUZIP]

I just finished installing the rear mudguard. I used 3M paint protector applied before installing the zip ties.

[IOUZIP]

Updated picture still holding tight on the front and rear.

[rtp]

Which size rear guard is that?