Luna DPC-18 Display Question

[Joseph Wagner]

I upgraded to a Luna Full Color DPC-18 Display from the DP-07 that came with my Luna BBS02 750Watt Conversion kit. My question is: The DPC-18 Display did not come with any hardware in the kit/package (2 screws to attach the display and 1 smaller screw to attach the thumb switch to the handle bars. Or the rubber sleeves to mount the display on smaller diameter bars. Are they not included on a $100 plus shipping Luna Display?? Please let me know!
I emailed customer support and they said, "No" we don't include hardware to mount it but send us a pic of everything you got in the box." Which i just did. I also wanted to check here to verify in case they get back saying " Yep you got everything! Mounting hardware is not include with the Luna DPC-18 Display Kit." (Which will blow my mind.)
And people will say to just use the ones you got with the cheap DP-07 Luna BBS02 Conversion Kit! Well, the rubber grommets/sleeves won't work because they are specific to the DP-07. And I planned on selling the cheap B&W DP-07 to help cover the cost of the DPC-18 and without including the hardware would be hard to do.

Thanks,
Joe

[Bill B]

I upgraded to a Luna Full Color DPC-18 Display from the DP-07 that came with my Luna BBS02 750Watt Conversion kit. My question is: The DPC-18 Display did not come with any hardware in the kit/package (2 screws to attach the display and 1 smaller screw to attach the thumb switch to the handle bars. Or the rubber sleeves to mount the display on smaller diameter bars. Are they not included on a $100 plus shipping Luna Display?? Please let me know!
I emailed customer support and they said, "No" we don't include hardware to mount it but send us a pic of everything you got in the box." Which i just did. I also wanted to check here to verify in case they get back saying " Yep you got everything! Mounting hardware is not include with the Luna DPC-18 Display Kit." (Which will blow my mind.)
And people will say to just use the ones you got with the cheap DP-07 Luna BBS02 Conversion Kit! Well, the rubber grommets/sleeves won't work because they are specific to the DP-07. And I planned on selling the cheap B&W DP-07 to help cover the cost of the DPC-18 and without including the hardware would be hard to do.

Thanks,
Joe

Sorry Joe. I just bought one and had it send to my local bike shop for them to replace a broken now out of stock 750C. I can't say for sure if it did or didn't come with the rubber mounts. Is it possible for your build you won't need them?

[73Eldo]

How much space do you need to make up? Old inner tube or tire cut up? Pieces of hose cut up? Home depot type of places sell various sizes and types of hoses in short lengths. If you have or know someone with a 3d printer that's a great way to make spacers.

[ncmired]

In my experience, you DO get everything needed to mount the center style displays on either 22.2mm grip area or 31.8mm clamp area handlebars - that being the 22.2mm sleeves, screws and the related nylok nuts. IIRC the related parts are usually packed in a sealed plastic bag, within the display cardboard box (not loose).

Luna's customer service response may have been either uninformed or the person read too much into "mounting" or "hardware" - or something.

I'd bring this issue up to Paxtana via the "30 minutes or so" forum he monitors. He may not catch it on this forum.

[Dshue]

I know the hardware comes with displays from Amazon sellers. I've had a few p850c displays and they always include all screws, nuts and washers to install as well as 3 pairs of 3 different size rubber spacers for the display.