Announcement

Collapse
No announcement yet.

BBSHD Chainguard? Really Tall Fat Bike Kickstand?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • vivaldi
    replied
    I actually used one on my bike (non-ebike). It is not super pretty, but it was the best I could find for chain board or chain guard. I wonder whether this will work with a Bafang kit.

    Leave a comment:


  • Louis
    replied
    I have one around here somewhere. It's really kinda ugly and clunky. I'll try to remember to see if I can find mine. Off hand, I think it would be a PIA to retro fit. I started to mess with my OEM chanigaurd and got lazy and use an old school pant clip.

    Leave a comment:


  • vivaldi
    replied
    SKS Chainboard mentioned above can be installed with a Bafang BBSHD? Anyone has actually installed one?

    Leave a comment:


  • HD Rockhopper
    replied
    Ok, when conditions are cruddy, I wear light weight overpants, and peel them off after my ride.
    I'm still a believer in obsessive compulsive chain cleaning with silicone based chain lube after almost every ride.
    And I can't picture a chain guard ever fitting properly, looking right on a Bafang setup.

    Leave a comment:


  • Arcanum
    replied
    Originally posted by Lance Tesla View Post
    Yeah, I've been considering that one, thanks.

    Originally posted by HD Rockhopper View Post
    Due to the huge offset of the Bafang chainrings I never have a chain rubbing pant problem.
    The fact that I wipe down my chain, and re-lube with DuPont silicone after every ride or two, keeps it near pristine looking (no grunge).
    Rochester NY winters mean lots of snow, ice, slush, and salt. Wet, messy chain lube is more-or-less required, and my jeans tend to rub the chain despite the offset.

    Originally posted by Marin View Post
    Lunacycle has a fat bike kickstand, I'm using one on my luna frame,
    Sorry I forgot to mention: The bike doesn't have a kickstand mounting plate. Also, that stand looks an awful lot like the stand I took off my Yuba Mundo cargo bike. Assuming it's essentially the same stand, it's not long enough. :(

    Leave a comment:


  • Marin
    replied
    Lunacycle has a fat bike kickstand, I'm using one on my luna frame,

    Leave a comment:


  • HD Rockhopper
    replied
    Due to the huge offset of the Bafang chainrings I never have a chain rubbing pant problem.
    The fact that I wipe down my chain, and re-lube with DuPont silicone after every ride or two, keeps it near pristine looking (no grunge).

    Leave a comment:


  • Lance Tesla
    replied
    SKS Chainboard: http://www.amazon.com/SKS-bike-chain.../dp/B009GIDBDA

    Leave a comment:


  • Arcanum
    started a topic BBSHD Chainguard? Really Tall Fat Bike Kickstand?

    BBSHD Chainguard? Really Tall Fat Bike Kickstand?

    Ok, this is only half related to ebikes specifically. I built an electric fatbike with a BBSHD. It's pretty sweet, but I use it for commuting, particularly in the winter. I'd like to keep my pant leg from rubbing on the chain without using velcro to hold it. Does anyone know of a chainguard designed for or easily adapted to the BBSHD?

    Also, does anyone know of a kickstand that might fit a fatbike? Specifically one where the chainstay is a good 14" off the ground? (An actual kickstand, not a rod you carry with you to prop the bike up.)

    Edit: I forgot to mention that the bike doesn't have a kickstand mounting plate. Also, the kickstand would probably have to be in the vicinity of 16"-18" long.
    Last edited by Arcanum; 04-15-2016, 02:37 PM.
Working...
X