Announcement

Collapse
No announcement yet.

Controller seems stuck in on position.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Controller seems stuck in on position.

    When ever the battery is on my bafang 750W bbs02 takes off when peddles are moving, I have no way to change power level or change to no pass. Trying to program has no effect. Not sure where to go.

    #2
    There might be a short in the controller wires, someplace. There are two wires you can connect directly, to operate without a display connected. If same wires are shorted on yours, I guess it would be always on.

    Unplug the display and see if it stops doing this. If so, bad display, probably. If not, perhaps a short in the wiring harness.

    Something to try...good luck.

    Spare harness is available...
    Fabrication is fun! Build something today. Show someone. Let them help. Inspire and share. Spread the desire.

    Comment

    Working...
    X