Announcement

Collapse
No announcement yet.

Welcome to the forum, please read how this forum operates

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chrisblis
    replied
    I have a Pedego Interceptor. I have pedal assist and a full throttle. By mistake, I have been walking my bike and by accident I twisted the full throttle. I had the pedal assist in 1 so the full throttle was operable. My bike took off. The problem is me - not the bike. Is there a mechanism that goes between the handlebar grips and the throttle that would prevent my hand from slipping on to the full throttle when I am walking the bike --- just in case there is a time in the future when I fail to move the pedal assist to 0 before I start walking my bike. I hope this makes sense.

    Leave a comment:


  • theshel
    replied
    Hello.. My first day. Owner of SOndors SS

    Leave a comment:


  • Mugsy
    replied
    Hi, I am new to this forum, but not to DIY. Currently building an eBike, just got my Cyclone 3000 watt motor, friday. Now comes the fun part, installing the motor.

    Leave a comment:


  • Varney
    replied
    Hi are you someone I can talk to I'm new I've never done this before

    Leave a comment:


  • Varney
    replied
    Hello how do I talk to people

    Leave a comment:


  • Varney
    replied
    Hi I'm new here? I want to run 2 36volt identical batteries in series and maybe run a switch to toggle between series and parallel so I can go for distance or power what do you think

    Leave a comment:


  • JESPKR
    replied
    New to forum, having some issues with the 52 volt charger

    Leave a comment:


  • Redlab
    replied
    Hello all !!
    I'm a newbie to the forum and to ebikes. I'm 58 with Lymes disease and looking to build an ebike out of my fat tire bike for Hunting and scouting that will include riding trails, some dirt rds, up steep hills and some riding through open woods on trails, also pull a trailer with equipment or harvested game. I feel there is allot of great knowledge in this forum to help me out with this build so expect allot of questions !!

    Leave a comment:


  • Fattiredave
    replied
    Hi I’m new here,I bought the 1000w 52 v kit and installed it on my Fuji Wendigo fat tire bike. I’ve gotten almost 200 miles off road on it already. So far every thing is working great. I did have some issues with the install and the guys at Luna were very helpful and understanding. So thank you all for the help. I’ve attached some pictures hopefully they show up on here. Not sure if this is the place to ask but I installed the rat. side twist grip throttle and I was wondering if there is a way to set it to not be so sensitive. Meaning can it be adjusted to not come on immediately like a maybe so it can be turned a 1/4” before it engages thanks.
    Attached Files

    Leave a comment:


  • paxtana
    commented on 's reply
    Bummer. Yes you may be out of luck on that.

  • Bikehop
    replied
    Hi, please tell me I'm not all alone. I boughta stride 400 from pedcotect. After ten months the battery went bad. They had me send it in and said they would get back to me. Months went by with no answer. Finally I got someone they said board in battery went bad and they would have to build a new one, months went by they were very hard to reach finally got them after blowing me off a few times they said a new battery shipment was coming from overseas. It's has been over a year and they tell me the battery rack will have to be rebuilt. Now they have been bought by Life E V. and do not return my email or calls. Am I just out of luck?

    Leave a comment:


  • Will Ebike
    replied
    Hi all!
    Regards from a newbikie!
    I hope I will learn a lot from you all and soon be able to buy a suitable bicycle and convert it to an Ebike. Just yesterday I bought a used Gary Fisher Soltice 20”Frame for my bike experience and may be that I find this one good for conversion.
    Last edited by Will Ebike; 07-20-2019, 03:47 AM.

    Leave a comment:


  • jlarge
    replied
    "Curently" overcoming ESR. Yeah I know it's a bad EE joke. Just remember resistance is futile and to smile on your ride.
    Click image for larger version

Name:	image.png
Views:	285
Size:	8.4 KB
ID:	89677

    Leave a comment:


  • Ed3rd
    replied
    Hi all, new guy here. I just installed a BBS02 on my rail trail cruiser. It's a Specialized Roll with a step thru frame. I should get the ferrules for my shifter cable so I can finish the gear shift sensor install today. After reading tons of threads I only have one question at the moment. It seems like possibly a real sore point but .... can I make my throttle be linear rather then binary without physical modification to the controller. I wish I read all this about the throttle issue before I bought this unit but it is what it is. I have the 500C display and only found the throttle issue, on / off mode, once I powered up for the first time. I did purchase the programming cable if it helps.
    Thanks
    Ed

    Leave a comment:


  • paxtana
    commented on 's reply
    If you have ebrakes or exposed ebrake connectors I would start by checking that, and unplugging the ebrakes if you do. Next would be to check the battery connection you made, like checking resistance.

    Here is how to do that


    If none of that works, email support.
Working...
X