Announcement

Collapse
No announcement yet.

24V/36V brushless Controller New unable to power up to 3 Phased motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    24V/36V brushless Controller New unable to power up to 3 Phased motor

    24V/36V brushless Controller New unable to power up to 3 Phased motor

    Symtoms
    1. Battery supply 24V
    2. Red ignition to power the controller such as hall, throttle, etc 5V, alarm
    3. However, i found the green is the throttle as measured no voltage.
    4. As soon as throttle connected, signal measured, it does not send voltage to the 3 phased being measured with multimeter
    No power measured on the 3 phased motor cables
    Last edited by ronn0011; 05-19-2020, 12:49 AM.

    #2

    Comment

    Working...
    X