Not sure what I did her but it doesn't look good
-
-
Just hoping for an explanation of what an ERROR H30 means? -
I've had an error 30h. It's a vague error code saying theres a communication problem between the display and the motor .
mine was a pinched wire coming off the display. For others it required replacing the harness . For still others it can indicate a bigger issue , like a damaged controller .
hopefully your issue is simpleComment
-
Thanks for assisting!!Comment
-
I hope you're up and running strong !!Comment
-
Hey guys, here is an update on my situation. Got the new controller installed, double checked all connections ....all good. Power up the display with no errors showing. Bad news-- no PAS and no throttle. The motor does momentarily kick in but not much. I do hear the motor make some noise as if trying to engage. Need advice!!!
Much Appreciated!!!
-
-
Any update?Comment
-
Hey guys, here is an update on my situation. Got the new controller installed, double checked all connections ....all good. Power up the display with no errors showing. Bad news-- no PAS and no throttle. The motor does momentarily kick in but not much. I do hear the motor make some noise as if trying to engage. Need advice!!!
Much Appreciated!!!
-
-
Hey guys, here is an update on my situation. Got the new controller installed, double checked all connections ....all good. Power up the display with no errors showing. Bad news-- no PAS and no throttle. The motor does momentarily kick in but not much. I do hear the motor make some noise as if trying to engage. Need advice!!!
Much Appreciated!!!Comment
Comment