If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Error 04 Throttle no homing, Unplug the throttle, if the message clears up, it's time to replace it!
Error 05 Throttle abnormality: Throttle maybe damaged and not working, or the throttle may only work intermittently, Check throttle casing for damage, check wiring for a loose connection to the battery. Sometimes might happen
When setting up the speed sensor its important to make sure that the red led light is on when the motor powers up. This needs to be approximately 2mm (1/8 inch) from the magnet. Refer to arrow below (Photo 4)
NOTE: If the speed sensor is not close enough then you will get an error code 21 or 15H on the display
If the red
Comment