Announcement

Collapse
No announcement yet.

Pinout Help for BLDC Controller 48v controller TaoTao

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Pinout Help for BLDC Controller 48v controller TaoTao

    Please help me find the correct connection to these Pinouts I have a TaoTao 48v/500w ebike (pinouts from inside bldc controller) please list the colors/pinout these connect to.. THANKYOU SO MUCH IN DESPERATE NEED OF REPAIR!

    D- Thin Black =
    D+ Thick Red = (TO Braker/BAT +)
    Thin Red =
    B5 Thin Green =
    VS Thin Green =
    H- Thin Black =
    HW Thin Blue =
    HU Thin Yellow =
    H+ Thin Red =
    +5V Thin Red =
    TS+ Thin Red =
    TS Thin Grey =
    XS Thin White =
    B Thin Blue =
    B5 Thin Green =
    SH Thin Purple =
    E Thin White With Blue =
    HX Thin Orange =
    G03 Thin Blue =
    HX Thin Orange =
    *UNDERSEAT WIRES*
    Throttle Red with White =
    Throttle Black with yellow =
    Throttle Green With Red =

    Green with yellow wire *could be green with white I''m slightly color blind spliced under seat from dash to rear end spliced to? (dc converter/control module/gnd?) =

    Well thank-you for your time reading this and I hope you have the time to reply to this message as it is very important to me!!!
    Christopher Coccimigio



Working...
X