Announcement

Collapse
No announcement yet.

Is this programming cable wired wrong?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Is this programming cable wired wrong?

    I've trying everything to get this Luna purchased programming cable to connect to my bbs02 for a week and finally decided to open up the connections. It appears that the GND and the RXD are connected to the wrong wires. Any input would be helpful, thanks
    Stew
    Click image for larger version

Name:	20180927_104945.jpg
Views:	16
Size:	501.0 KB
ID:	74819

    #2
    Based on mine, I agreed that the GND and the RXD are reversed - here's mine, for reference:
    Click image for larger version  Name:	Comm_Cable.png Views:	1 Size:	191.1 KB ID:	74830



    The power wire (within the heat shrink) is not connected
    Last edited by ncrkd; 09-27-2018, 03:10 PM.
    BBSHD/BBS02B builds: IGH 1 2 3 4 5 Derailleur 1

    Comment


      #3
      Thank you, I swapped out the green and black and it now works. Now my folding bike won't do wheelies or kick my wife of her's. Thanks again

      Comment


        #4
        Originally posted by Stew View Post
        Thank you, I swapped out the green and black and it now works. Now my folding bike won't do wheelies or kick my wife of her's. Thanks again
        LOL - you're welcome, sir!

        I have to add though - wheelies, like farts, are fun. Such a loss. I can see however the need to prevent injuries to your wife.
        Last edited by ncrkd; 09-28-2018, 06:41 AM.
        BBSHD/BBS02B builds: IGH 1 2 3 4 5 Derailleur 1

        Comment

        Working...
        X