Disabling PAS on BBHSD

[AZguy]

This thread is all about how to program it that way: https://electricbike.com/forum/forum...tting-pas-wire

Cutting to the chase if you set:

PAS 0 - I=100%, S= 0%
PAS designated assist level = 0
Throttle designated assist level = By Display's Command

Then in any PAS level except PAS 0 (PAS 0 has no power) the throttle will operate whether pedaling or not limited by the PAS level selected and PAS operation is entirely disabled

[xcnick]

Program without PAS. However you can peddle and throttle at the same time which is even better.

[deerfencer]

Hi, new owner of a BBHSD-powered Luna Lone Wolf ebike here. I'm not thrilled with the PAS and would like to try running the bike via throttle only to see if I like the power delivery better that way. What is the easiest way to disable the PAS without destroying the capability of restoring it if I decide to reenable it? Can I disable it via programming or do I need to physically pull a wire in the controller? Any other shortcuts that might be easier? Thanks.