If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Today i fall from my ebike (T&A electric bike) and now it says something with “M” on the screen and the bike dosnt work the battery is fully charged asswell
heres a picture of the screen
I would speculate that the controller is not getting proper hall sensor readings from the motor. But with no specific information on make or model of your bike. Or specifics of your controller and motor. the best I can offer is to check the wiring between the motor and controller to see if it has been damaged... smashed, cut, pulled, ETC...
Comment