Announcement

Collapse
No announcement yet.

Brand new cyclone did I get a dud?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Brand new cyclone did I get a dud?

    Hi guys. So I have the asi bac 4000 watt controller and 72v panasonic. Lunacycles did a great job packaging up my kit. I did what the instructions suggested and charged to 100% for the first charge and allowed over night for the cells to settle. My install went smooth and everything is perfect, so I thought. I have no chain until tomorrow so I have everything setup and no chain on the sprocket, I fire it up and turn the throttle and the sprocket spins! But only for 1 or 2 second and it dies. When I say dies, the voltage meter on the throttle is still lit up but nothing happens when I spin the throttle. Then I can turn the key off and back on and the same thing happens again. I hope this is something simple but I have checked everything over 3 or 4 times and its really straightforward, no accessories and the wires are pretty dummy proof. Any suggestions? Thanks!
Working...
X