that sucks..
for the front...would be whatever Rockshox provides with Yari, don't know on the rear.
KTMracer63
Newbie
Last Activity: 1 minute ago
Joined: 07-06-2020
Location: Texas
-
KTMracer63 commented on IOUZIP's to X1 Front Rim & Tire Wobble and/or Axle Bolt Lose / Spacing Issuedidn't notice play like that on mine....
really no different than checking a dirt bike, play in the axle/hub area typically means crappy spacers,...Last edited by KTMracer63; 5 hours ago. -
Pretty much tore the bike completely apart since arrival 2 weeks ago...it's a requirement, haha. The headset is not up to par and the fork steering tubes...Last edited by KTMracer63; 8 hours ago. -
If you can get your hands on a truing stand....at harbor freight is like 50 bucks. Take the tire off and check the wheel.
Mine are also off slightly,... -
The display is motor specific, hence the triangle plug.....it's not "retailer/assembler" specific.
It can be ordered at Aliexpress, for...Last edited by KTMracer63; 12 hours ago. -
Here's the funny part....installed the 2.1 Cartridge with the new C1 air spring (170mm) late last night.
This morning, I first tested the stem with...Last edited by KTMracer63; 19 hours ago. -
Yep...one of the fixes I mentioned above, remove the smallest spacer below the steering stem....however, this lowers the bars, another band-aid fix....Last edited by KTMracer63; 1 day ago. -
Too low for my comfort level and a "safety issue" (1st pic)......the expander plug is even further below the hex head by about a .25",...
Last edited by KTMracer63; 1 day ago. -
Your Ludi will come with firmware 14.5 version....it sucks....unless you requested Luna to update to 14.6, which has been noted they're doing now....Last edited by KTMracer63; 1 day ago. -
Discovered the probable cause/same issue last week with the steering head hardware and fork tube (cut/length)...
This is a LUNA issue PAX...Last edited by KTMracer63; 19 hours ago. -
You should join the Facebook X1 Riders group...substantial wealth of tech info, thankfully knew about this before receiving the bike.
Luna should...Last edited by KTMracer63; 1 day ago. -
Then Luna should help you out...
I'm in the process of swapping shocks...you aren't kidding, that bolt you have circled that's in front of the flip-chip,...Last edited by KTMracer63; 3 days ago. -
Never said it was...and you were addressing the quote I wrote. -
The checking of voltage is/was already obvious....was only asking clarification to what meter you're using.
Already confirmed with Pax the other...Last edited by KTMracer63; 3 days ago. -
Hopefully the pre-orders will be out soon for you.....expect a minimum 1.5mo wait, unless China has sped up the mfg process, if so, hopefully sooner....Last edited by KTMracer63; 5 days ago.Leave a comment:
-
Congrats!!
I'll have to dig it up, but there was a 14.5 firmware Ludi rider (in X1 facebook group) posting his cable for the speed sensor... -
If you are referring to the shock mount hardware within the flip-chip, contact Luna, if that doesn't work, call Rockshox/SRAM (for Monarch Shock hardware),... -
The besst tool doesn't download the Firmware from the bicycle. If connected properly, the besst app (on your computer) will tell you which firmware you...Last edited by KTMracer63; 6 days ago. -
Thx Pax...are you referring to something like this?
https://www.amazon.com/IFLYRC-Analyz...3LB9GB3/ref=as... -
gotcha......any chance you might have allowed the Besst software to update?
just trying to think of everything...
No activity results to display
Leave a comment: