Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Yeah I can confirm there should be 9- 1/4" balls on each side, front and rear. Glad it was just the brakes causing your grinding noise. These disc...Last edited by Dshue; 6 days ago.
-
I know the hardware comes with displays from Amazon sellers. I've had a few p850c displays and they always include all screws, nuts and washers to install...
Leave a comment:
-
I would run the cable through a full housing and either leave it under the bottom bracket or re route it above. I know on the BBSO2 there is plenty of...
Leave a comment:
-
I did some work on the wifes XP this afternoon, a new seat and the Axum calipers. It came with Tektro calipers and rotors. The rotors were warped from...
Leave a comment:
-
We'll see how it goes. Maybe I'll carry the bottle with me and see how long it goes before I get a dry chain noise.
I don't ride in the rain or...
Leave a comment:
-
-
I believe that I got the old lube off. The Finish line chain cleaner does a good job and it's not too messy even with it filled far above the fill line....
-
-
Nothing comes up for me. Chances are it's a site to catch typos of Trek bicycles site.
Leave a comment:
-
I picked up a Finish Line chain cleaner and a bottle of Squirt chain wax. I ran the chain through the cleaner with mineral spirits twice, then I ran it...
Leave a comment:
-
Yeah the pinion system is like an igh. But it doesn't change the fact that as it is the cadence switch location you aren't going to go through the gears...
-
Because most cadence hub motor systems are on and off. All it wants to do is reach its max predetermined speed. Just about any gearing is good enough...
Leave a comment:
-
With a torque sensing system it would be worth it but with cadence sensing there would be no real benefit of having a pinion drive.
Leave a comment:
-
The pas sensor connects to the controller not directly to the display. The cable that connects the display to the controller handles the pas function...
Leave a comment:
-
We did another 25 mile ride last Sunday. The rail trail we were on failed to impress us so we turned around at the 13 mile mark instead of the 21 mile...
Leave a comment:
-
I get by just fine with high volume tires and low pressure. But if I were stuck with skinny tires that require high pressure then a suspension seat post...
- Likes 1
Leave a comment:
-
25 mile ride today and the Axum was flawless. I'm glad to have the chain skip taken care of. Boy it was hot. Not many leaves on the trees and no clouds...
Leave a comment:
-
It's an inherent trait of being a bicycle, not a design flaw. Turn with the pedals at 3 and 9. You want the inside pedal forward of the outside pedal...
Leave a comment:
No activity results to display
Show More
Leave a comment: