Luna Full Suspension Stabilizer Bar: Replaces triangle bit???

[BadBac]

Welcome Rosie. There are many experts here so feel free to post away. Let us know how u like the X1!...

[BadBac]

[BadBac]

I drilled a hole in the stabilizer bar to fit where my water bottle mounts are located. I plan to add a couple hose clamps to the mix for some added insurance...

[BadBac]

So now it seems very solid with the stabilizer bar also. Time will tell for sure....

[BadBac]

I zapped a bit off the triangle bracket with an angle grinder to allow it to clear the suspension bolt. Not much removed so still plenty of contact...

[BadBac]

So I pulled out the angle grinder again. I nipped just enough off the triangle bracket to clear he suspension screw cap. I took my time and zipped off...

[BadBac]

Thanks for the link and pics! That is a pretty amazing build. My first build is in process now. I plan on posting the build when done ... assuming it...

[BadBac]

Would you mind posting a picture? I'd love to see that setup!...

[BadBac]

I got motivated enough to pull a wheel off a shelf. Maybe it’s time to mount them up now? These are 26” Nokians. I’ve put many miles on them and...

[BadBac]

So I would generally run only a studded front just when ice is very rare but may be present. I can usually catch the rear (with studded front) but never...

[BadBac]

Im hoping to get some winter rides in this year. I totally appreciate the growl sound! It strangely kind of sounds like you are running over a few sheets...

[BadBac]

Tony was apologetic and guessing he will check current stock. Since I’ve heard of nobody else having his issue yet I’m guessing mine was a one-off...

[BadBac]

FYI, I opened a ticket with Luna to be sure. Tony let me know that I should use both the triangle mounting plate AND the stabilizer bar. The former...

[BadBac]

Thanks for the comments zmarkjam and Eldo - they are greatly appreciated! I will need grind off material on the 'triangle mounting plate' if I use it...

[BadBac]

To be more clear, this is what I'm calling the 'triangle spacer' ...
...

[BadBac]

FYI, I was able to remove just a bit of material (1/16 >> 1/8 inch) from the stabilizer bar with an angle grinder and the stabilizer bar now fits...

[BadBac]

So specifically this guy .... BSBF-1 Stabilizer Bar for BBS02 and BBSHD - Luna Cycle

Does this REPLACE the triangle spacer piece that bolts...

[BadBac]

I printed off a template available here for the Luna Wolf: Luna Wolf V2_2019final.pdf - Google Drive.

This will give you a good idea if...

[BadBac]

For some clarity, my bike of choice for this build is a 2003 Santa Cruz Blur. It's a 26" full suspension bike. I spent some great times (and have...

[BadBac]

Thanks again. The angle grinder on the stabilizer bar may be a pretty easy fix. I might give that a shot. I do think the black piece in the suspension...