Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
i don't know for sure but have to belive the luna is a stock setup. if you look up the motor and surron controller it is sold as a pair from the manufacturer...
- Likes 1
-
i'm not totally clear on your question, but i can tell you i run the v2 on a Chibattery 60v gladiator and the Eggrider is outstanding. Yes, the GLE app...
Leave a comment:
-
Dual Motor SP180C2
Guys. I'm doing experiments on crazy power configs for the surron (not top speed more torque and speed balanced). You may have seen my other threads as...
-
SP180-C2 Series Dual-Motor Upgrade for Surron
Guys. I'm doing experiments on crazy power configs for the surron (not top speed more torque and speed balanced). You may have seen my other threads...
-
Quinc - the ASI Product sheet for 4k and 8k says this.... "The controller linearly reduces maximum output current when the internal controller temperature...
Leave a comment:
-
Kauaiguy- you're a genius. Thank you! ands thanks for the tip on the BACDOOR app. that's a lead i didn't have. Appreciate it...
Leave a comment:
-
Quinc. that's an unknown quantity. here is what i know. when i run my motor hard at 12kw it will heat up to 142 degrees at the hottest point on the case...
Leave a comment:
-
Thanks Quinc. Just to close off the thread... i did complete this. This is no harder than a bmx bike. you just need basic spoons for removing the tire...
Leave a comment:
-
Thanks for the input. i ditched the Eggrider and went to the GreenLine Engineering app. More flexible. Set that at 16kw for some experimenting. When...
Leave a comment:
-
i run the kke on my surron x. I just mistakenly landed in the flat tonight off an 8 foot jump. i didn't wash out or bounce off. It's not bad. play...
Leave a comment:
-
that's odd. i get 67.2 on the same battery, which is about 20 charge cycles old, but i'm measuring on the Eggrider. I will go check the BMS app tomorrow...
Leave a comment:
-
Experimenting with EggRider and GLE App
Guys, i have a BAC4000 on a Surron x with a Chi Gladiator 60v/60 battery. All else is stock. Motor is stock.
I've been running the bike...
-
>12kw power adjustment help needed
Guys- need help adjusting power. I'm running a asi bac4000 with a chi 60v/60 gladiator battery controlled by Eggrider. I've been running the bike at...
-
i would love to have a fat tire on my surron but the rotating mass is just scary. many wider tires are nearly double the 2lb stocker....
Leave a comment:
-
worked perfectly. i did use a rubber mallet to tap down on the bars with all bolts loosened up. That worked. Thanks for the video.
Leave a comment:
-
-
How hard is changing rear surron tire
guys. I need to change the 17" nobby tire on my rear. I have no tools beyond just the hand spoons used for a mx tire. How hard is this? is this...
-
head set clicking
Guys. does anyone have a picture of the headset disassembled? I had a very small click in my headset when grabbing the front brake hard. I tried to tighten...
-
this is interesting. i have the Chi 60v 60 and it goes in and out with ease. in fact, i removed the stock foam spacers in the batt compartment per the...
-
well then when i see pedal bikers on my dirtbike trails i'm going to give them a rash of stink eye.
- Likes 1
Leave a comment:
No activity results to display
Show More
Leave a comment: