Bafang It4 bus cable length..

[jaaklucas]

Does anyone know if they make a short version of this cable? The stock ones are 53 inches or so and I ran up my downtube so I need a short one....

[jaaklucas]

A year and a half ago my Hailong 18650 pack was getting weak after 18000K, 4 1/2 years so I got to looking for a new pack. I found that the 2170s had...

[jaaklucas]

I can see now with a single front sprocket the rear cassette is the key element in the gear ratios. Did you use the same bike frame with the 11 speed...

[jaaklucas]

Yea 7 speed freewheel. I think 7 is the max for a freewheel. 11 to 34t. I like to pedal . My last battery log showed 18,000K over 4 1/2 years. That was...

[jaaklucas]

Im running throttle only with PAS disabled. My battery pack is 48V 19.5 AH. With a decent amount of charge Im registering over 1100W-1150W with the throttle...

[jaaklucas]

My Ebike is still freewheel. For the last 5 years the 11-34t only lasts a year anyways so I change the chain at the same time. That was with a 1000W hub...

[jaaklucas]

Not that it matters but Wiki isnt the key for finding ingrediants in stuff like this. Its the "Material Safety Data sheet". This is no baloney...

[jaaklucas]

Knew this would get yall stirred up! This is from Wiki....

WD-40's main ingredients as supplied in aerosol cans, according to the US Material...

[jaaklucas]

Cant comment on using it for your stated purpose but for programming it works real good....

[jaaklucas]

My philosophy on chains on my bikes and motorcycle is the less gunk the better. Attracts grit which chews up the chain and sprockets. Grease, wax etc....

[jaaklucas]

Mine slipped on my first take at it. I saw a post on youtube where a fellow scored the bottom bracket frame with a hacksaw to give the nubs from the tightening...

[jaaklucas]

Im a new BBSHD convert. The HD stands for Heavy Duty. My philosophy on E motors is get the biggest motor even if you under power it. Weight is a minimal...

[jaaklucas]

I just installed this half twist throttle and it works great with my BBSHD. Notice the low profile at the end of the half twist compared to the usually...

[jaaklucas]

So I tried the zip tie method quickly with the rear wheel suspended and spinning. The Freewheel didnt seem to be able to keep up with the BBSHD freewheel...

[jaaklucas]

AZ, Since I dont use a gear sensor(not opposed to it still learning mid drive) I will give it a go. I only use a 7 speed freewheel anyways so it may be...

[jaaklucas]

Oh now I get it! Super clever idea. I will go through your links more and Im definetly keen on it. So the rear wheel and freewheel are locked. I need...

[jaaklucas]

Retrorockit,I think were saying the same thing. No problems pedaling and shifting a chain when its not motor powered. For sure keep pedaling. But when...

[jaaklucas]

I got out yesterday for a spirited 60K mixed ride with throttle only PAS totally disabled. I came from a throttle only hub drive so im totally used to...

[jaaklucas]

Ok I got it to work. I went to an earlier thread of yours on the topic and disabled the Pedal assist settings. Thank you sir!...

[jaaklucas]

I am happy with PAS but would like just one setting. PAS 0 with full throttle ONLY providing engine power and me being able to jump in on the pedals and...